New Products and Information Updates Blog

Add Your Heading Text Here After grinding carbide end mills, the goal of edge preparation is to remove micro-chipping from

A easy way to produce a special tap Thread Overview Nominal Diameter: 1.238 inches Threads per Inch (TPI): 20 Thread Type: Unified National Fine (UNF) standard, right-hand thread (typical for Hardinge 5C collet nuts) This fine thread allows for precise clamping of the collet when tightening the collet nut, ensuring the collet grips the workpiece securely without slippage. The 1.238-20 specification corresponds to the external threads on either the collet or the collet nut that fits the spindle or drawbar assembly. We use Hardinge 5 C collets in

New Amazing T6 9250   Our early reject rates   on motors to get shaft tolerances  was an interesting ride, less than

Carbide Insert Sharpening Carbide inserts are pretty easy to tune up, as with all carbide dont wait till its destroyed 

Set up basics                                  

https://youtube.com/shorts/gXGkV1I2oyI

Microscope Kit for Cuttermaster Tool Grinders   This  machine mounted microscope is good for doing  small radius.  Easy to mount 

Flute grinding and OD flute grinding on a 2025 Toycen Journeyman JXT In this video we demonstate one of the

This post is  to review circular blade sharpening options that are available from Cuttermasters. Next update we will  demonstrate how

 CM03DRS  Spherical tip grinder https://www.youtube.com/watch?v=w4NHYGfG3KAhttps://www.youtube.com/watch?v=zhB-VlPL-B4 2025 DIrect Drive DC ER16 Spindle High Speed This higher speed spindle (prototype) is being

Tradesman Precision Belt AC Servo 2X48 Variable speed reversing The Tradesmen belt is very similar to the Edge Apex, belt

Edge Apex Belt Kits for Knfe experts This is an assortment of belts from around the world from our various

Sharpening a Relentless 3.6″ Titanium Drop Tip Hunting Knife

Cuttermasters ~ Ottawa Test and Training Facility Recent Visitors Up for Training Standard Packaging   Smithville, Ontario AMEX Steelcase   SanDiego, California

https://www.youtube.com/watch?v=neupF0-UnPohttps://www.youtube.com/watch?v=vqB9IRANybE&t=490shttps://www.youtube.com/watch?v=Eiwc3ik_AQQhttps://www.youtube.com/watch?v=z3Pt9x77Bs4&t=21s

https://www.youtube.com/watch?v=aOAsCCFffAo TX Drill Point Grinders on Cuttermasters

APEX 250mm resin bond grinding wheels formulated specifically for knife sharpeners   Developed by Jeff Toycen at Cuttermasters. These wheels

Movies links and helpful stuff for Tool Grinders Manuals   Movies https://www.youtube.com/watch?v=5ob9O1ueTeY How to Sharpen a Spot drill / Chamfering

The 2025 Apex Belt 4248 is a very capable belt grinder for bladesmiths. Variable speed Reversing with a powerful brushless

WE have a new Partner on this project Taixing Machine tools , and the build some beautiful equipment

 Tradesman EDGE Apex Knife Sharpening System Designed by Jeff Toycen Introduction: A powerful Geared Belt Drive DC or AC Work

New Annular Cutter / Countersink / Tap sharpening set up We have created a new tool spindle which is a

 The new CMO1 T is a production support workstationEliminate downtime. Package Includes :CM01V  with 82mm Journeyman Motor,  Collet set ,

Edge Apex   Production release May 2026. New Split rail front rail easy for shipping less damage. Edge Apex DC in

        We tested the result with our amazing 2000 Grit resin bond diamond wheel Almost no detectable

This Post is about Radius grinding and Ball end grinding.Begining with tool Setting and ending grinding full ball end secondary’s

A “Tool Setter” allows for hard  stop timing of the tool rotational timing in the collet which is more accurate