APEX 250mm resin bond grinding wheels formulated specifically for knife sharpeners
Developed by Jeff Toycen at Cuttermasters. These wheels have very specific properties, The resin chemistry, combined with the correct concentration and a very specific grit, result in a unique combination physical properties that produce a uniquely productive characteristics for fast material removal at low heat with good shape retention. in the 100 grit roughing wheel.
Our finishing wheels 500, 600 and 1000 grit, leave a manageble burr and a superior finish Ideal for stropping.
Properly designed Resin bond wheels have a very specific character
The unique character of a resin bond wheel can be very useful for bladesmiths.
Different pressures different speeds, Different coolant situations provide different finishes.
These wheel are designed to be run on the EDGE APEX a variable speed reversing machine 100 to 1000 RPM.
Every APEX Wheel is produced to Cuttermasters specifications. The wheels Mounted and ground true, and dressed at our facility.
Generally Speaking Resin bond wheels should not be used unless they have been trued and dressed
Edge Apex wheels are extremely long life wheels which actually makes them a very good choice for cost concious market sharpeners
Apex wheels are designed to be the fastest wheels with the best burr condition of any wheel available in the market today
Lowest cost per blade.
Jeff