Jeff Toycen, Author at Cuttermasters

Set up Options Necks , Flats JXT (single wheel) CM01P Tower Twin Wheel

Essentially with the new motor spindle height, Either is good Necks and flats are best done with the tool to […]

Jeff Toycen / March 20, 2020

Makes easy work out of Weldon flats and hogging out knuckle roughers The new 2020 Journeyman DC This should have

Jeff Toycen / March 18, 2020

About grinding Carbide with CBN: CBN is a superabrasive and will grind cemented carbide. There are several grades of cemented

Jeff Toycen / January 29, 2020

In the beginning: We needed a reversing variable speed motor for a new tool grinder. Jeff , was going to

Jeff Toycen / January 28, 2020

You’re new favorite grinding wheel that you didn’t know existed. Say goodbye to your stone wheels, burnt fingers and slimey

Jeff Toycen / January 26, 2020

D=100mm,H=19.05mm=3/4 inch, W=6mm X=6mm,T=25mm Diamond grit size 100- 120 N Hardness 100 percent Concentration

180 Grit Tradesman CBN Wheel for Lathe operators Makes CHip breakers easy work