Drill Point Grinder (2-32 mm), 0.08″ – 1-1/4″

This is our full capacity drill sharpener, grinding drill points up to 1-1/4″ and as small as 0.080″. It is essentially our two popular grinders: the DS213 (up to 1/2″) and the DS1332 (1/16″ to 1-1/4″) in one machine. The grinder comes complete with a full  collet set and storage. Our drill grinders all feature easy operation (go from never-seen-a-drill to expert in under an hour) with perfect back split, center cutting geometry every time.

The DS232 Large Drill Sharpener provides a valuable return on investment to any shop with dull drill bits. Adding this sharpener to your shop will immediately decrease your spending on new tools. The DS232 Drill Sharpener is easy to use, small footprint heavy-duty construction for industrial tool sharpening. It allows you to create center-cutting end geometry so that a pilot hole is not needed.  The machine comes with a 200 grit wheel 30 pieces collet set.

This is the most well built Drill Point grinder on the market in this class
Cuttermasters grinders are tested in North America,  and covered by our manufacturer’s warranty. The wheels are the bottom line, if the wheels are no good the machine is no good. Our wheels are produced using General Electric abrasive media under strict conditions to ensure long life and in some cases are designed by Cuttermasters in North America. Color may vary as we stock both in red and yellow.

• Accurate Center within 0.001 Inch
• Creates center cutting geometry or chisel tip (adjustable dept of cut, and swing)
• High accuracy balance of tip geometry (adjustable depth of cut)
• Easy Collet chuck,  thrust bearing
• High accuracy steel alloy collets
• High-efficiency DC motor
• Industrial quality  grinding wheel (Sea Shore Diamond)
• Portable all Steel construction nice workmanship
• Both Grinding sheves are on the front of the machine (better)

In stock

[vc_row row_title=”Replacement CBN and Diamond Grinding Wheels”][motor_products orderby=”title” order=”” ids=”15878, 15498″]