Carbide cut off grinder
weldon set screw flats

Motor Spindle for Shank Grinding (Neck Diameter Reduction, Neck Back) and Cut Off. 5C or ER32 Collet-type

  • Grind neck diameter reductions / shank relief
  • Choose Collet Type: ER32 or 5C
  • Carbide tool cut off
  • Flat Weldon set screw flats
  • Save your air bearing
  • Built for our modern tool grinders and appropriate for older grinders like the MG-30, HDT-30, and CM-01 as well.
SKU N/A Category

$ 1,485 – $ 1,745 (USD)

  • CAD: $ 2,043 - $ 2,401

Production grind cylinders such as end mill neck reductions and tool cut off

  • Designed for production use grinding of cylinders such as carbide and HSS end mill neck reductions and tool cut off
  • Choose 5C or ER32 collet type
  • Bolt to any table with T-slot in x or y direction
  • Plug into 110V(220) or battery-powered
  • Collets not included
  • Tailstock available ($425)
The Motor Spindle consists of an collet and spindle in a bench-mounted, honed housing. It is driven by a timing belt on a small 24 volt DC motor and is designed to be used all day.  The concentricity of the taper is less than .0005″.  ER32 collets generally are available up to 3/4″ but 7/8″ and 1″ are available as specials.  The bolt pattern allows the motor spindle to be bolted to any table with a t slot in either x or y direction.
The motorized tool spindles are built for our modern Cuttermaster Professional tool grinders but should work on just about any tool grinder with t-slots.
Weight 3 kg
Dimensions 30 × 30 × 18 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top