Menu

0

$ 0.00 (USD)

Motor Spindle for Shank Grinding (Neck Diameter Reduction, Neck Back) and Cut Off. 5C or ER32 Collet-type

  • 5C Motor Spindle
  • 5C Motorized Tool Spindle – Cuttermasters – side 2
  • ER32-Motorized-Tool-Spindle—Cuttermasters—side-2
  • 5C Motorized Tool Spindle – Cuttermasters – includes
  • ER32-Motorized-Tool-Spindle—Cuttermasters—includes
  • 5C Motorized Tool Spindle – Cuttermasters – with wrench
  • 5C Motorized Tool Spindle – Cuttermasters – Front 2
  • neck-and-flat3
  • Motorized-Spindle-CM-01DC
  • neck-and-flat
  • Flat-Weldon-Set-Screw-Flat
  • neck-and-flat5
  • 5C Motor Spindle
  • 5C Motorized Tool Spindle – Cuttermasters – side 2
  • ER32-Motorized-Tool-Spindle—Cuttermasters—side-2
  • 5C Motorized Tool Spindle – Cuttermasters – includes
  • ER32-Motorized-Tool-Spindle—Cuttermasters—includes
  • 5C Motorized Tool Spindle – Cuttermasters – with wrench
  • 5C Motorized Tool Spindle – Cuttermasters – Front 2
  • neck-and-flat3
  • Motorized-Spindle-CM-01DC
  • neck-and-flat
  • Flat-Weldon-Set-Screw-Flat
  • neck-and-flat5

Description

  • Grind neck diameter reductions / shank relief
  • • Choose Collet Type: ER32 or 5C
  • • Carbide tool cut off
  • • Flat Weldon set screw flats
  • • Save your air bearing
  • • Built for our modern tool grinders and appropriate for older grinders like the MG-30, HDT-30, and CM-01 as well.
read more

Price

$ 1,485$ 1,745 (USD)

  • CAD: $ 1,931 - $ 2,269

Quantity

- +

Options

Clear

0 reviews

Compare

Choose Options

Description

Production grind cylinders such as end mill neck reductions and tool cut off

  • Designed for production use grinding of cylinders such as carbide and HSS end mill neck reductions and tool cut off
  • Choose 5C or ER32 collet type
  • Bolt to any table with T-slot in x or y direction
  • Plug into 110V(220) or battery-powered
  • Collets not included
  • Tailstock available ($425)
The Motor Spindle consists of an collet and spindle in a bench-mounted, honed housing. It is driven by a timing belt on a small 24 volt DC motor and is designed to be used all day.  The concentricity of the taper is less than .0005″.  ER32 collets generally are available up to 3/4″ but 7/8″ and 1″ are available as specials.  The bolt pattern allows the motor spindle to be bolted to any table with a t slot in either x or y direction.
The motorized tool spindles are built for our modern Cuttermaster Professional tool grinders but should work on just about any tool grinder with t-slots.

Specifications

CM-5CM Specifications
Collet Chuck Type5C
Motor24V DC (plugs into 110 / 220V AC)
RPMVariable 150-400
Motor spindle height4.6" or 5.39" center
Table MountT-Slot
Spindle Concentricity0.0005", honed-bore
Power Supply110/220V or Battery
Capacity5C 1/16 - 1" (1-1/16" thru hole)
ConstructionAll metal
Country of ManufactureCanada
CM-ER32M Specifications
Collet Chuck TypeER32
Motor24V DC (plugs into 110 / 220V AC)
RPMVariable 50-500
Motor spindle height4.6" or 5.39" center
Table MountT-Slot
Spindle Concentricity0.0005", honed-bore
Power Supply110/220V or Battery
CapacityER32 1/8"- 3/4", 2-20mm (.875" and 1" available as special collets)
ConstructionAll metal
Country of ManufactureCanada

Additional information

Weight
3 kg
Dimensions
30 × 30 × 18 cm

Reviews (0)

Be the first to review “Motor Spindle for Shank Grinding (Neck Diameter Reduction, Neck Back) and Cut Off. 5C or ER32 Collet-type”

  • There are no reviews yet.