Contact Us 
Phone 
Corner Radius / Corner Prep, Dual Profiled Radius, Diamond
Description
Grinding wheel with profiled radius for quickly corner prepping end mills- Designed to quickly produce a corner radius without the use of the Radius Attachment
- Also good for neck reduction using the flat of the outside of the wheel
- Three options: Choose 0.020" and 0.040"rads, 0.030" and 0.060" rads, or 0.090" and 0.120" rads
- Use on any tool grinder with a 1-1/4" hub
- • 1-1/4" arbor
- • 6" Diameter
- • Diamond
- • 200 grit
- Description
- Additional information
- Reviews (0)
- Add a review
Description
Grinding wheel with profiled radius for quickly corner prepping end mills
- Designed to quickly produce a corner radius without the use of the Radius Attachment.
- Three options: Choose 0.020″ and 0.040″rads, 0.030″ and 0.060″ rads, or 0.090″ and 0.120″ rads
- Use on any tool grinder with a 1-1/4″ hub
- • 1-1/4″ arbor
- • 6″ Diameter
- • Diamond 200 grit
- • Prolong the life of your carbide end mills by removing the brittle corner
Note: Due to the precision required to get a good corner on a carbide end mill a very accurate motor shaft is required so that the run out at the profile of the wheel is minimal. A high accuracy Tradesman motor shaft, set up in the factory, is recommended – add $200 USD)
Do you need a 6" wheel guard?
Additional information
- Weight
- .5 kg
- Dimensions
- 17 × 18 × 6 cm
Reviews (0)
- There are no reviews yet.
Be the first to review “Corner Radius / Corner Prep, Dual Profiled Radius, Diamond”