Contact Us 
Phone 
ER32 Motor Spindle for Shank Grinding, Shank Reduction / Cut Off
Description
- Grind neck reductions / shank relief
- Carbide tool cut off
- Flat Weldon set screw flats
- Save your air bearing
- Build for our modern tool grinders and appropriate for older grinders like the MG-30, HDT-30, and CM-01 as well.
- Description
- Additional information
- Reviews (0)
- Add a review
Description
- Designed for production use grinding of cylinders such as carbide and HSS end mill neck reductions and tool cut off
- Collet chucks are individually selected for accuracy
- Bolt to any table with T-slot in x or y direction
- Plug into 110V(220) or battery-powered
- Includes 10pc ER32 collet set (1/8”-7/8”)
- Tailstock available ($425)
It consists of as ER 32 collet chuck in a Bench mounted honed housing, driven by a timing belt and a small 24 volt DC motor it is designed to be used all day the collet chuck are chosen based on accuracy.
there is a bolt pattern that allows you to be bolted to any table with a t slot in either X or Y Direction.
Taper run-out is less than .0005 capacity up to one inch.
.875 or 1 inch require special collets
Specification:
24 volt
25-250 RPM variable
3/8 16 T nuts Mount in X or Y orientations
All metal construction honed bore .0005 concentricity
Motor spindle height 4.6 or 5.39 inch center
Comes with 10 piece ER3 collet set in a case
Power supply 110/220 V input 3- 24 v dc output
Comes with 10 piece ER3 collet set in a case
Power supply 110/220 V input 3- 24 v dc output
Build for our modern tool grinders and appropriate for older grinders like the MG-30, HDT-30, and CM-01 as well.
Additional information
- Weight
- 3 kg
- Dimensions
- 30 × 30 × 18 cm
Reviews (0)
- There are no reviews yet.
Be the first to review “ER32 Motor Spindle for Shank Grinding, Shank Reduction / Cut Off”