Basic End Mill Grinder CM-01DC
The CM-01DC, our most basic end mill grinder, is the DC variable speed version of the tried and true CUTTERMASTER series of end mill sharpener. Featuring many improvements, most notably the addition of a DC variable speed (Torque Compensating Whisper Drive) motor and control, the CM-01DC is a great machine for grinding ends and flutes. Our Toycen Air Bearing Fixture, used on all of our traditional end mill grinders, is an improvement over the original as the housing is roller burnished (as opposed to honed on the original) providing greater accuracy.
This is a great machine for grinding the ends and flutes of end mills. With the addition of accessories you can grind countersinks (CM-CSJ Countersink Cam Set), corner radiuses (CM-03 Radius Attachment).
CM-01DC versus the Journeyman JX and CM-01P. The main difference between the CM-01DC and the Journeyman JX, is that the JX has the added ability to swivel the motor head 360 degrees, allowing for additional set ups. It is a basic machine to get you grinding end mill ends and flutes, without some extras, at an affordable price point. The CM-01DC ships with an Aluminum Oxide grinding wheel, 5C Collet set, tool kit.
CM-01 DC Specifications
|Air Bearing Stroke||10.5″ (266.7mm)|
|Air Bearing Swing Over Table||9.8″ (248.92)|
|Cutting Tool Capacity||2″ shank, 9.8″ O.D.|
|T-Slot Dimension||0.8″ (20.32mm) x 0.5″ (12.7mm) x 0.67″ (17.018mm)|
|Table Feed Gradations||0.001″ (0.02mm)|
|X-Axis Table Travel||6″ (152.4mm)|
|Y-Axis Table Travel||3″ (76.2mm) + sildes back & forth 6″ (152.4mm)|
|X-Axis Table Working Space||16.5″ (419.1mm) x 5.5″ (139.7mm)|
|Y-Axis Table Working space||13″ (330.2) x 5.5″ (139.7)|
|Wheel||5″ x 1.25″ cup or 6″ dish with Z-axis|
|Motor Tilt||+35° -8°|
|Motor||1/3 hp, 3450 rpm, 110v / 60Hz or 220v 50Hz|
|Net Weight||180lbs (82Kg)|
|Gross Weight||232lb (106Kg)|
|Machine Dimensions excluding handles||21″ x 20″ x 21″|
|Shipping Dimensions||30″ x 28″ x 29″|
The CM–01DC is the DC Variable Speed version of the original CUTTERMASTER CM-01. This machine is a great end mill grinder and has some limitations in that the motor does not swivel or lift, so that, for example, end gash can be difficult.
Both of these grinders require the CM-03 Radius Attachment for corner rads and the JX-Riser for end gash. The Cuttermaster Professional can grind corner rads and end gash out of the box, because it has built in radius air spindle and z axis tower
Call us at 1 (800) 417-2171
Cuttermasters is a machine tool engineering and manufacturing company specializing in Tool and Cutter Grinders. Cuttermaster – Endmill Sharpeners – Drill Sharpeners