Sharpen Flutes as well as Ends with a Traditional Tool Grinder
To sharpen the flutes (outside helical diameter) of end mill ends as well as the flutes, you need a tool grinder with an air spindle. These are our traditional tool grinders, based on the old CUTTERMASTER design and Made in Canada with state-of-the-art DC drive and air spindle. These grinders can be set up to sharpen corner rads, countersinks, taps, compression bits, as well as many other tools and also secondary operations like neck reduction Weldon set screw flats and carbide cut off.
Cuttermaster Professional 2022 CM-01 End Mill Sharpener (Direct Sale only)
End Mill / Tool Grinders
$ 3,486 – $ 3,886 (USD)
Advanced End Mill Sharpener – Cuttermaster Professional Journeyman Tool Grinder JXT
End Mill / Tool Grinders
$ 5,475 (USD)
Journeyman Tower with Toycen Radius Air- Bull and Ball Nose Corner Radius End Mill / Tool Grinder, JXTR
Corner Radius
$ 7,445 (USD)
CUTTERMASTER Professional Advanced Tool Maker CM-01P
End Mill / Tool Grinders
$ 7,745 (USD)
Sharpen End Mill Ends
If you’re only sharpening end mill ends, these timed-chuck grinders make the complicated geometry of an end mill end simple. Once the tool is timed in the ER collet chuck assembly, center cutting ends are easily achieved by dropping the chuck into prescribed grinding ports. These grinders are available as combination grinders as well featuring other useful operations: cut off, corner radius, and drill point grinding. The JXT with an Easy Ends Kit may also be a good choice for you
Advanced End Mill Sharpener – Cuttermaster Professional Journeyman Tool Grinder JXT
End Mill / Tool Grinders
$ 5,475 (USD)
Easy Ends Kit (PS3) End Mill Ends Cuttermaster or Journeyman JXT
4", 5", 6" Machinist / Specialty
$ 498 – $ 613 (USD)
1/8″ – 3/4″ End Mill End and Corner Radius Grinder ESR520
Specialty and Combination Tool Grinders
$ 3,345 (USD)