The DS232 Large Drill Sharpener provides a valuable return on investment to any shop with dull drill bits. Adding this sharpener to your shop will immediately decrease your spending on new tools. The DS232 Drill Sharpener is easy to use, has a small foot print and a heavy-duty construction for industrial tool sharpening. It allows you to create center cutting end geometry so that a pilot hole is not needed. The machine comes with a 200 grit wheel and collet set.
These drill grinders are not the look-alike grinders that can be found on eBay and Alibaba. Cuttermasters grinders are tested in North America, CE approved and covered by our manufacturer’s warrantee. The wheels are the bottom line, if the wheels are no good the machine is no good. Our wheels are produced using General Electric abrasive media under strict conditions to ensure long life and in some cases are designed by Cuttermasters in North America.
|Drill Diameter||2mm – 32mm|
|Power Supply||AC 110V 50/60Hz, AC 220V(Opt.)|
|R.P.M of Motor||5300|
|Grinding Wheel||200 grit|
|Weight||N.W 25Kg G.W 25.7Kg|
|Machine Size||L 430mm, W 250mm, H 190mm|
|Packing Size||L 500mm W 310mm, H 310mm|
|Standard Accessories||Collet x 32 pcsHexagon Wrench 3mm x 1pcs / 4mm x 1 pcs|